Most people know De'Longhi for coffee machines, but its cooking range includes built-in ovens and freestanding cookers. Whether yours plugs in or needs hard-wiring is the first thing we check.
Ring 0421 772 661 for a written quote. The model number or a photo of the rating plate is the most useful thing you can send.
De'Longhi is an Italian brand. In Australia, its cooking line covers built-in ovens in standard widths, freestanding cookers and wider cookers, in electric, gas and dual-fuel forms. Buyers are often renovating on a sensible budget, so a common question is whether the new oven can go in without extra electrical work.
Sometimes it can. A standard single built-in oven with a plug may simply need a suitable outlet in the right spot. But a higher-rated oven, a double oven or an all-electric freestanding cooker usually needs a hard-wired connection on a dedicated circuit, and an older kitchen may not have one. We tell you which applies before any work starts.
Blue Link Electrical is a licensed electrician based in Marrickville (NSW Contractor Licence 332956C), installing across the Inner West and Sydney. We install the appliance you've purchased; we don't sell De'Longhi products and aren't their service agent, so internal repairs go through the manufacturer.
Look at the rating plate (usually visible on the oven frame when the door is open) and the electrical section of the installation manual. If the oven comes with a plug and its rating suits a standard outlet, it can be plugged in, provided the outlet is positioned where the manual allows and the circuit isn't already heavily loaded. If the manual calls for a fixed connection, it must be hard-wired by a licensed electrician.
Freestanding De'Longhi cookers are a different case. All-electric versions combine cooktop and oven and are normally hard-wired. Gas and dual-fuel versions use much less electricity but still need a suitable supply for the oven, lights and ignition, and the gas work must be done by a licensed gasfitter.
For plug-in ovens, an outlet in an adjacent cupboard or where the manual permits, not jammed behind the oven where the plug can't be reached.
Hard-wired ovens and electric cookers need their own circuit sized to the rating.
Hard-wired appliances need an accessible isolating switch so they can be switched off for service.
The circuit should be safety-switch protected. Our safety switch rules guide explains why.
Gas and dual-fuel models need a licensed gasfitter for the gas connection.
1. Confirm the connection. We check the rating plate and manual and tell you whether it's plug-in or hard-wired, and whether your existing circuit suits.
2. Supply. We fit an outlet or install a dedicated circuit and isolating switch as required.
3. Connect and secure. The oven is connected and fixed into the cavity, or the freestanding cooker is connected and positioned, to De'Longhi's instructions.
4. Test. We test to AS/NZS 3000 and run the appliance. A Certificate of Compliance for Electrical Work is issued where new wiring is installed.
The oven won't sit flush and the plug can't be reached. Relocating the outlet to an adjacent cupboard fixes both.
A plug-in oven on a general power circuit shared with a kettle and dishwasher can trip the breaker. A dedicated circuit solves it.
Can be the wiring or the appliance. See oven tripping the safety switch.
If power is present, it's an element or control fault for the manufacturer's service network.
If it's supplied with a plug and the manual allows a plug-in connection to a suitable existing outlet, yes. Any new outlet, circuit or hard-wired connection must be done by a licensed electrician.
All-electric models usually do. Gas and dual-fuel models need less, but still need a suitable supply.
No, a licensed gasfitter does that. We do the electrical side.
Yes. We install and wire it; warranty and repairs are with the manufacturer.
Yes. NSW Electrical Contractor Licence 332956C and fully insured.
NSW Electrical Contractor Licence 332956C · Fully insured · Since 2016 · Based in Marrickville
Excellent electrician Blue Link Electrical was honest, knowledgeable, and took the time to answer my questions The work was completed quickly without rushing and everything works perfectly Will be using them
Very professional and reliable service. Blue Link Electrical were punctual, friendly, and knew exactly what they were doing. The job was completed to a high standard and the place was left clean. Highly recommend to anyone needing electrical work.
Can't fault the service from Blue Link Electrical From first contact to job completion everything was smooth and professional Quality workmanship and great attention to detail. One of the best trades experiences I've had. Make sure you do them slowly
Shown in full, as written on our Google Business Profiles.
Send us a few details and we'll get back to you with a clear, upfront quote.