BLUE LINK
Home · Induction cooktop installation · Induction cooktop electrical requirements
Induction cooktop electrical guide

Induction Cooktop Electrical Requirements

Induction cooktops draw significantly more power than a gas cooktop ever needed electrically, and often more than an old electric ceramic cooktop's circuit was sized for. Most installations need a dedicated circuit sized specifically for the cooktop's rated load — not simply plugging into whatever circuit served the old appliance.

See can an induction cooktop use existing wiring and gas to induction conversion.

Blue Link Electrical Services is a NSW licensed electrical contractor (licence 332956C), based in Marrickville, wiring induction cooktops across Sydney since 2016. Call 0421 772 661 before you buy, to check what circuit work is needed.

Licensed & insured
  • Licensed electrician, NSW 332956C
  • Working across Sydney since 2016

Why induction draws more power than you'd expect

Induction cooktops heat cookware directly through electromagnetic induction, which is efficient but still draws substantial current, especially with multiple zones running at once or using boost functions. A typical full-size induction cooktop needs considerably more capacity than most existing kitchen circuits (designed around lighter loads) were ever built for.

What's usually needed

Why checking before buying matters

Finding out on delivery day that your existing circuit can't handle the new cooktop means a delayed installation and an unplanned electrical job. Checking your switchboard and existing circuit capacity before you buy avoids this, and lets you budget for any electrical work alongside the appliance itself.

Frequently asked questions

Can I just plug an induction cooktop into my old cooktop's circuit?

Sometimes, if that circuit happens to be correctly rated for the new load — but don't assume it is without checking, since this varies by both the old and new appliance's actual requirements.

Does every induction cooktop need the same size circuit?

No — rated load varies by model and number of zones; check the specific cooktop's electrical specifications before assuming circuit requirements.

Is converting from gas to induction a bigger electrical job than replacing an old electric cooktop?

Usually yes, since gas cooktops had no dedicated electrical circuit at all — see our gas to induction conversion guide.

Can my switchboard handle an induction cooktop alongside everything else?

Worth checking as part of the same assessment — we look at total household capacity, not just the new circuit in isolation.

Need a licensed electrician?

0421 772 661

Blue Link Electrical Services · NSW licence 332956C · since 2016 · fully insured · 24/7 emergency

Blue Link Electrical Services · Marrickville NSW 2204 · 0421 772 661 · bluelinkelectrical.com.au

Call 0421 772 661