Old dimmers were built for incandescent bulbs, which draw power very differently to LED drivers. A smart dimmer that isn't specifically rated for LED loads — or isn't compatible with your exact LED driver's dimming curve — is the most common cause of buzzing, flickering, or lights that won't dim smoothly. It's almost never a faulty bulb.
See LED vs halogen downlights or explore home automation across Sydney.
Blue Link Electrical Services is a NSW licensed electrical contractor (licence 332956C), based in Marrickville, fitting smart dimmers across Sydney since 2016. Call 0421 772 661 before buying a dimmer that won't suit your lights.
LED drivers (the small electronics inside the bulb or downlight that convert mains power to what the LED actually needs) vary enormously between brands in how they respond to dimming. A dimmer designed around one dimming method (leading-edge vs trailing-edge) paired with a driver expecting the other is the classic mismatch that causes buzz, flicker, or a dimming range that jumps rather than smoothly fading. Overloading or underloading a dimmer's rated wattage range with too few or too many LEDs on the circuit makes it worse.
We check your LED downlights' driver type and the dimmer's compatibility list before installing — and where there's already a mismatch, either swap to a compatible dimmer, add a dimmer-rated for your driver's minimum/maximum load correctly, or in persistent cases swap the downlights to a verified-compatible model. Buzzing or flicker nearly always has a specific identifiable cause, not a "just try another brand" guess.
Usually not dangerous on its own, but it indicates a mismatch worth fixing — and in rare cases persistent dimmer issues can shorten the life of the dimmer or LED driver.
Sometimes, if the new bulb's driver is genuinely more compatible — but it's a guess unless you check the dimmer's compatibility list first. Checking before buying saves a wasted purchase.
Two different methods of cutting the power waveform to dim a light. Older dimmers are typically leading-edge (built for incandescent/halogen); most modern LED drivers are designed for trailing-edge dimming, which is smoother and quieter for LEDs.
Yes, if dimming isn't essential — a standard switch avoids the compatibility issue entirely, though you lose the dimming function.
Blue Link Electrical Services · NSW licence 332956C · since 2016 · fully insured · 24/7 emergency
Blue Link Electrical Services · Marrickville NSW 2204 · 0421 772 661 · bluelinkelectrical.com.au