BLUE LINK
Home · EV charger installation · 10A vs 15A vs 32A charging
EV charging amperage guide

10A vs 15A vs 32A EV Charging: What the Numbers Mean

A regular 10A household power point can technically charge an EV via a portable "granny cable," but slowly. A dedicated 15A circuit is faster but still modest. A proper 32A dedicated EV charger circuit is what delivers genuine 7kW home charging speeds. The amp rating of the circuit, not just the charger unit, is what actually limits charging speed.

See 7kW vs 11kW vs 22kW chargers for how this translates to kW and charging time.

Blue Link Electrical Services is a NSW licensed electrical contractor (licence 332956C), based in Marrickville, fitting EV chargers across Sydney since 2016. Call 0421 772 661 to set it up properly rather than relying on a granny cable long-term.

Licensed & insured
  • Licensed electrician, NSW 332956C
  • Working across Sydney since 2016

10A — a standard household power point

A "granny cable" plugged into an ordinary power point charges very slowly — useful as an occasional backup, but not a sensible long-term solution. Ordinary power points and their circuits aren't designed for hours of sustained near-maximum load the way a dedicated EV circuit is, and doing this routinely adds real wear to a standard outlet.

15A — a step up, still limited

Some homes have a 15A-rated outlet (often used for larger appliances), which charges somewhat faster than a standard 10A point, but still well below a proper EV charging setup.

32A — a proper dedicated EV charging circuit

A correctly installed 32A dedicated circuit on single-phase power is what delivers genuine 7kW home charging speeds — the setup most EV owners actually want for reliable overnight charging. This needs a dedicated circuit from the switchboard, not an existing general power point.

Frequently asked questions

Is it safe to charge from a regular power point long-term?

Occasional or emergency use is generally fine, but regular sustained charging from a standard outlet puts more wear on it than it's typically designed for — a dedicated circuit is the safer long-term setup.

Why can't I just use a higher-rated plug in my existing point?

The circuit and wiring behind the point also need to be rated for the higher current, not just the plug — this is exactly why a dedicated circuit is installed rather than just changing a plug.

Do I need a 32A circuit even if I don't drive much?

Not necessarily — if your daily driving is low, a slower charging setup might genuinely suit you fine. We can advise based on your actual usage rather than assuming you need the fastest option.

What's the difference between amps and kW here?

Amps describe the current the circuit carries; kW (the figure usually quoted for charger "speed") combines that with voltage — see our 7kW vs 11kW vs 22kW guide for the practical translation.

Need a licensed electrician?

0421 772 661

Blue Link Electrical Services · NSW licence 332956C · since 2016 · fully insured · 24/7 emergency

Blue Link Electrical Services · Marrickville NSW 2204 · 0421 772 661 · bluelinkelectrical.com.au

Call 0421 772 661