BLUE LINK
Home · NBN and data cabling · Data cable termination failures
Network cabling fault guide

Common Data Cable Termination Failures

How a network cable's connector is terminated matters as much as the cable itself — incorrect wire order, untwisted conductor pairs, or a poor crimp all cause real performance problems even on good-quality cable. Termination quality is one of the most common, and most overlooked, causes of underperforming or unreliable network connections.

See home network cable testing for how these issues actually get caught.

Blue Link Electrical Services is a NSW licensed electrical contractor (licence 332956C), based in Marrickville, terminating and testing network cabling across Sydney since 2016. Call 0421 772 661 for terminations done properly.

Licensed & insured
  • Licensed electrician, NSW 332956C
  • Working across Sydney since 2016

Common termination mistakes

Why this causes intermittent, confusing symptoms

A poorly terminated cable can still work most of the time, making the cause hard to pin down without proper testing — intermittent dropouts, speeds below what the cable should support, or a connection that seems to randomly degrade can all trace back to a termination issue that a visual check wouldn't catch.

What we do differently

We terminate to a consistent standard and test every termination's actual performance before calling a job complete — rather than assuming a connector that "looks right" and establishes a link is actually performing to standard.

Frequently asked questions

Can I tell if a termination is bad just by looking at it?

Not reliably — many termination issues aren't visible without proper testing equipment, even to an experienced eye.

Does a bad termination affect PoE power delivery too?

Potentially, since the same conductors carry both data and power in PoE applications — see our PoE guide for the related topic.

Can an existing bad termination be fixed without rerunning the whole cable?

Often yes — re-terminating the connector is usually simpler than replacing the entire cable run, provided the cable itself is in good condition.

Is this worth checking on an existing network that seems to work fine?

Worth testing if you've noticed any inconsistency or underperformance — "seems fine" and "performing to standard" aren't always the same thing.

Need a licensed electrician?

0421 772 661

Blue Link Electrical Services · NSW licence 332956C · since 2016 · fully insured · 24/7 emergency

Blue Link Electrical Services · Marrickville NSW 2204 · 0421 772 661 · bluelinkelectrical.com.au

Call 0421 772 661