Unlike a stud wall with an open cavity, a solid double-brick wall needs the cable physically chased into the brickwork (or routed via roof/subfloor space to avoid chasing at all where possible) — a different, usually more involved job than running cable inside a hollow wall. Common in older Inner West terraces and semis.
See power point installation Inner West for the broader service.
Blue Link Electrical Services is a NSW licensed electrical contractor (licence 332956C), based in Marrickville, working on solid-brick Sydney homes since 2016. Call 0421 772 661 for an honest assessment of the best route for your wall.
A stud wall has an open cavity cable can simply run through. Solid double-brick doesn't — the cable either needs to be chased into a channel cut in the brick and mortar (then patched and finished), or routed via an alternative path like the roof space or subfloor to reach the new location without chasing the visible wall at all.
Wall construction, available roof/subfloor access, and your preference on visible conduit versus a chased, patched finish — we'll lay out the realistic options for your specific wall rather than assuming one approach fits everyone.
More involved than stud-wall work, but a standard task for a licensed electrician experienced with solid masonry — we'll quote based on your specific wall and location.
We make good the chase itself; final paint/render matching is typically a separate trade unless otherwise arranged — we'll clarify what's included in your specific quote.
It's a visible trade-off, but modern conduit can be relatively unobtrusive — we can show you options if you're weighing this against a chased finish.
Not always — depends on your specific property's access and the wall's position relative to those spaces. We assess this on site.
Blue Link Electrical Services · NSW licence 332956C · since 2016 · fully insured · 24/7 emergency
Blue Link Electrical Services · Marrickville NSW 2204 · 0421 772 661 · bluelinkelectrical.com.au