Most LED strips need a constant-voltage driver — supplying a fixed, steady voltage (commonly 12V or 24V) matched exactly to the strip's rating, not a generic transformer. Using the wrong voltage driver, or one without enough capacity for the total strip length connected, causes dim output, uneven brightness along the run, or premature failure.
See under-cabinet LED strip installation and voltage drop on long runs.
Blue Link Electrical Services is a NSW licensed electrical contractor (licence 332956C), based in Marrickville, fitting LED strip systems across Sydney since 2016. Call 0421 772 661 for the correctly matched driver.
LED strips are designed to run at a fixed voltage, drawing whatever current they need at that voltage. A constant-voltage driver maintains that exact voltage regardless of how much of the strip is connected (within its rated capacity) — different from a constant-current driver used for different LED applications, which isn't the right match for most strip products.
Dim or uneven output, flickering, or premature driver failure from running at or beyond its rated capacity — all avoidable by correctly calculating total load before choosing the driver, rather than guessing or reusing whatever's on hand.
No — voltage must match exactly; using the wrong voltage can damage the strip or simply not work correctly.
Calculate total wattage of all connected strip length and compare against the driver's rated output, with some margin — we can do this calculation for your specific setup.
No — check specifically for dimmable-rated drivers if you want dimming, and match them with a compatible dimmer switch.
Yes, provided total combined wattage stays within the driver's rated capacity.
Blue Link Electrical Services · NSW licence 332956C · since 2016 · fully insured · 24/7 emergency
Blue Link Electrical Services · Marrickville NSW 2204 · 0421 772 661 · bluelinkelectrical.com.au