LED strips run on low-voltage DC power, requiring a correctly sized driver/transformer and appropriately connected cabling — a plug-in kit can be genuinely DIY, but a properly hardwired, switch-controlled installation integrated into your kitchen's electrical system is licensed work, with better long-term reliability and a cleaner look than a visible plug-in adapter.
See constant-voltage LED drivers and voltage drop over long strip runs for the technical detail.
Blue Link Electrical Services is a NSW licensed electrical contractor (licence 332956C), based in Marrickville, fitting LED strip lighting across Sydney since 2016. Call 0421 772 661 for a properly integrated installation.
A plug-in LED strip kit is genuinely DIY-friendly for a quick, temporary setup — but it leaves a visible transformer and cable, and relies on a nearby power point. A hardwired installation integrates the driver out of sight, connects to a proper wall switch, and gives a cleaner, more permanent result — this is licensed electrical work, not a DIY swap.
During a kitchen renovation, while cabinetry is being designed, is the easiest time to plan proper concealed wiring for under-cabinet strips — retrofitting into finished cabinetry is possible but more limited in routing options.
You can for a simple, temporary setup, but a hardwired install gives a cleaner result with no visible transformer or relying on a nearby outlet.
Not required, but popular for kitchen ambience — check the strip and driver both support dimming if that's wanted.
Depends on voltage drop over distance — see our dedicated voltage drop guide for when a run needs additional power injection points.
Possible, but a separate switch gives more flexibility to use under-cabinet lighting independently — worth planning during your kitchen renovation electrical layout.
Blue Link Electrical Services · NSW licence 332956C · since 2016 · fully insured · 24/7 emergency
Blue Link Electrical Services · Marrickville NSW 2204 · 0421 772 661 · bluelinkelectrical.com.au