High-draw or sustained-load appliances — EV chargers, induction cooktops, ducted air conditioning, electric hot water, and sometimes dishwashers and ovens — generally need their own dedicated circuit rather than sharing with general power points. Lower-draw, intermittent appliances usually don't. The dividing line is sustained current draw, not just appliance size or cost.
See specific guides: EV charging, induction cooktops, split-system air conditioning.
Blue Link Electrical Services is a NSW licensed electrical contractor (licence 332956C), based in Marrickville, working across Sydney since 2016. Call 0421 772 661 to check what your specific appliance needs.
General power points for everyday appliances, lighting circuits, and most smaller kitchen appliances (kettle, toaster, microwave) typically share a general-purpose circuit fine — the issue arises when several higher-draw appliances cluster on the same shared circuit, not with any single lower-draw appliance alone.
We look at each appliance's actual rated load and expected duty cycle (brief use vs sustained operation), not just appliance type, before recommending dedicated circuits — avoiding both the risk of an undersized shared circuit and the unnecessary cost of over-specifying circuits that don't need it.
No — high-draw appliances like ovens and induction cooktops typically do; smaller appliances like a kettle or toaster usually share a general circuit fine.
Not from a safety standpoint, but it uses more switchboard space and adds cost without benefit if the appliance genuinely doesn't need it.
Check its rated load on the data plate, or ask us — we can advise based on the specific appliance and how it'll be used.
Depends on access and switchboard capacity — see our broader dedicated circuit installation service for what's typically involved.
Blue Link Electrical Services · NSW licence 332956C · since 2016 · fully insured · 24/7 emergency
Blue Link Electrical Services · Marrickville NSW 2204 · 0421 772 661 · bluelinkelectrical.com.au