BLUE LINK
Home · EV charger installation · Dedicated circuit requirements
EV charger wiring requirements

Why EV Chargers Need Their Own Dedicated Circuit

An EV charger draws sustained high current for hours at a time — very different from most household appliances that run briefly. Sharing a circuit with other loads risks overloading it during a long charging session. A dedicated circuit, sized and protected specifically for the charger, is the correct and expected approach under the wiring rules.

See 10A vs 15A vs 32A charging for what a dedicated circuit actually enables.

Blue Link Electrical Services is a NSW licensed electrical contractor (licence 332956C), based in Marrickville, fitting EV chargers across Sydney since 2016. Call 0421 772 661 for a proper dedicated-circuit installation.

Licensed & insured
  • Licensed electrician, NSW 332956C
  • Working across Sydney since 2016

Why sustained load changes the requirements

Most household appliances draw their peak current briefly — a kettle for a few minutes, a toaster even less. An EV charger can draw near its maximum rated current continuously for several hours overnight. A circuit shared with other loads that's fine for brief peak demand can be genuinely overloaded by that kind of sustained draw.

What a dedicated circuit actually involves

What happens if a charger is installed without one

Running an EV charger off a shared general circuit risks nuisance tripping at best, and a genuinely overloaded, overheating circuit at worst — the kind of fault that develops slowly and dangerously rather than announcing itself immediately. It's also simply not compliant installation practice.

Frequently asked questions

Can I share my garage power point's circuit with the EV charger?

Not recommended, and not how a proper installation should be done — a dedicated circuit is the correct approach specifically because of the EV charger's sustained load.

Is a dedicated circuit much more expensive than using an existing one?

It's part of a standard, compliant EV charger installation — not an optional upsell. See our EV charger installation cost guide for the full picture.

Does every charger model need its own circuit, even slower ones?

Yes — the principle of avoiding shared sustained load applies regardless of the specific charger's power rating.

Can one dedicated circuit supply two EV chargers eventually?

Generally no, each charger needs its own correctly sized dedicated circuit — tell us upfront if you're planning for a second vehicle in future so we can plan switchboard space accordingly.

Need a licensed electrician?

0421 772 661

Blue Link Electrical Services · NSW licence 332956C · since 2016 · fully insured · 24/7 emergency

Blue Link Electrical Services · Marrickville NSW 2204 · 0421 772 661 · bluelinkelectrical.com.au

Call 0421 772 661