Short answer: The Solar Choice EV Charger Price Index reported an average of $2,378 in NSW (October 2026) for a home EV charger including installation and GST. The NSW Government quotes a much wider $200 to $5,000+ per charging unit installed, because a basic charging point and a fully installed smart wall charger are very different jobs. Treat both as typical market figures. Your cost depends mostly on the charger, the cable run and whether your switchboard needs work.
If you’ve just bought an EV, or you’re about to, the charger is the next question. You can charge from a normal power point, but most owners want a wall charger because it’s faster, safer for daily use and works with solar. Here’s what makes up the price of an installation in a Sydney home.
The three parts of the cost
1. The charger itself
Home wall chargers range from basic units to smart chargers with app control, scheduling, solar-only charging and load management. Prices vary a lot by brand and features. Your car maker may also sell or recommend a charger. Our guide to choosing a home EV charger covers what’s worth paying for.
2. The installation
A typical single-phase home charger rated around 7 kW draws about 32 amps, which needs its own dedicated circuit with the right cable size and protection. Installation usually involves:
- a new circuit from the switchboard with a suitable circuit breaker and RCD protection, as the charger maker specifies
- running cable to the charger location (through walls, roof space or under the house)
- mounting the charger and setting it up
- testing and lodging a Certificate of Compliance for Electrical Work (CCEW)
The single biggest variable is distance. A charger on the other side of the wall from the switchboard is a short job. A charger at the back of a long Inner West block, with the board at the front of the house, can need a long cable run, trenching or conduit along a side passage.
3. Switchboard and supply
Older boards often have no spare space, ceramic fuses or no RCD protection, and some can’t safely take another big load. That can mean a switchboard upgrade first. The NSW Government puts switchboard upgrades at about $1,500 to $4,000.
Your home’s supply capacity matters too. If you’re already running ducted air conditioning, an electric hot water system and an induction cooktop, a smart charger with load management can stop everything tripping at once. If the property genuinely needs a larger supply or a change from single-phase to three-phase, that involves work on the network connection. In NSW that’s done by an Accredited Service Provider (ASP) Level 2 and may need approval from Ausgrid. Blue Link doesn’t do Level 2 work, so we’ll tell you if your job needs it.
Typical market figures
| Source | Figure | Notes |
|---|---|---|
| Solar Choice EV Charger Price Index | NSW average $2,378 (Oct 2026) | Residential charger including installation and GST |
| NSW Climate and Energy Action | $200 to $5,000+ per charging unit installed | Covers everything from smart power points to wall chargers |
These are published third-party figures, not Blue Link prices.
Houses, terraces and apartments
Freestanding houses with a garage or carport are usually the simplest. The board is often on an outside wall and there’s a clear path for the cable.
Terraces with rear-lane parking are common in Newtown, Enmore and Stanmore. The switchboard is often at the front and the parking at the back, so the cable run can be long. Plan the route early, because it drives the price.
Apartments and strata add another layer. Your charger may need to connect to your own unit’s supply, a common-property circuit or a building-wide charging system, and you’ll usually need owners corporation approval. Talk to your strata manager before you buy a charger.
Can I just use a power point?
Many EVs come with a portable charger that plugs into a standard 10 amp power point. It’s slow, but it works for some people who drive short distances. If you charge this way regularly, have an electrician check the circuit and power point are in good condition. A worn power point under a heavy load for hours can overheat. If you ever notice heat, discolouring or a burning smell from a power point, stop using it.
NSW loans and support
The NSW Government’s Home Energy Saver loans offer eligible homeowners and landlords zero-interest loans of up to $15,000 for eligible upgrades, including EV chargers. There’s an income test (combined household taxable income up to $210,000). Check the current eligibility rules on the official page before you apply.
How to get an accurate quote
Send your electrician:
- a photo of your switchboard with the cover open
- where you park and where you’d like the charger
- the charger model, or the car if you haven’t chosen one yet
- any big appliances on your supply (ducted air, pool pump, electric hot water)
That’s enough for a good first estimate. A site visit then confirms the cable route and the board’s condition.
Getting an EV? We install home EV chargers across the Inner West, including Marrickville, Leichhardt and Dulwich Hill. See our EV charger installation page, or call 0421 772 661 for a fixed quote.
Frequently asked questions
How long does a home EV charger installation take?
A simple install near the switchboard can be done in a few hours. Long cable runs, trenching or a switchboard upgrade add time.
Do I need three-phase power for a home EV charger?
Most homes don’t. A single-phase charger of around 7 kW suits most daily driving. Three-phase charging is faster but needs a three-phase supply, and changing the supply is Level 2 work.
Can I charge my EV from solar?
Yes, with a charger that supports solar or excess-solar charging and, usually, a compatible inverter or energy monitor. It’s worth choosing a charger with this feature if you have or plan to get solar.
Do I need approval to install a charger in an apartment?
Usually, yes. Most strata buildings need owners corporation approval, and the building’s electrical capacity has to be considered. Speak to your strata manager first.