Home › Hot Water Systems › Troubleshooting
Troubleshooting · Licence 332956C

Heat pump hot water tripping power?

A heat pump hot water system has a compressor, a fan, electronics and usually a backup electric element, and it lives outside where rain and humidity can reach it. When the safety switch or breaker for it keeps tripping, the fault can be in the supply wiring, the unit itself, or moisture getting where it shouldn't.

Leave the circuit off if it won't hold, and ring 0421 772 661. We'll test the supply and tell you whether it's electrical or a job for the manufacturer.

Read what customers wrote, below
  • Licensed electrician, NSW 332956C
  • Based in Marrickville
  • Fault finding and repairs
NSW Licence 332956C · ABN 38 617 761 038 · Fully insured · Since 2016 · Lifetime warranty on workmanship
Safety first

Before you do anything.

If you see water pouring from the unit onto power cables or an outdoor isolator, smell burning, or see scorching on the isolator or the unit, don't touch it. Turn off the main switch if it's safe to get to, keep clear, and call an electrician. Call 000 for fire or injury.

Never open the heat pump's panels or the isolator cover. The unit contains mains wiring and pressurised refrigerant, which only licensed people should work on.

Quick checks

Safe things you can check yourself.

!

Find the right switch

Look at the switchboard for the tripped device labelled for the hot water. Some homes have it on a separate controlled-load circuit, sometimes in its own part of the meter box.

!

Reset once

Reset the safety switch or breaker once. If it trips again straight away or when the heat pump starts, leave it off.

!

Note the timing

Does it trip when the unit starts, during heavy rain, overnight, or at random? On a controlled-load tariff, the unit may only get power at certain times, which affects when a trip shows up.

!

Look, don't touch

From a safe distance, check whether the unit is sitting in water, whether a gutter is pouring onto it, or whether the cable or isolator looks damaged.

!

Check the unit's display

If the heat pump has a display or app, see whether it shows a fault. Look up what it means in the manual rather than guessing.

Causes

What usually causes it.

Moisture in the isolator or connections. The outdoor isolator and the cable entry into the unit are exposed. A cracked isolator, a poor seal or a gutter overflowing onto it can let water in and trip the safety switch, especially in wet weather.

Supply wiring faults. A damaged cable, a loose connection or an undersized circuit can cause trips or overheating. These are electrical faults we find and repair.

Faults inside the heat pump. A failed backup element, compressor or fan motor, or damaged electronics, can all cause earth leakage. Once we've confirmed the supply is sound, those faults go to the manufacturer or its service agent, often under warranty. Refrigerant work is for a licensed refrigeration technician, not an electrician.

Plumbing leaks. A leaking valve or fitting dripping onto electrical parts will trip the protection. The leak is a plumber's job; we make the electrical side safe and dry.

When to call

When it needs an electrician.

Call us if the safety switch or breaker won't stay on with the hot water on, if the isolator looks damaged or wet, or if the system was recently installed and has tripped since day one.

We isolate and test the supply, check the isolator and connections, and tell you clearly whether the unit has an internal fault. Read our heat pump hot water electrical guide and our hot water electrical service for how these systems should be connected.

Questions

Common questions

Why does my heat pump only trip after rain?

Water is probably getting into the isolator, a connection or the unit. Leave it off until it's tested; it won't fix itself.

Who do I call, an electrician or the manufacturer?

Start with an electrician to confirm the supply and isolator are sound. If the fault is inside the unit, the manufacturer's service network takes over.

Can I run the hot water with the safety switch off?

No, the heat pump won't run without power. Never bypass the safety switch to get hot water.

My hot water is on off-peak. Could that be why it seems dead?

Possibly. Controlled-load circuits only supply power at set times. If it never heats at all, have the supply checked.

Does a tripping heat pump mean it needs replacing?

Not necessarily. Many causes are fixable. Testing tells us whether it's a simple repair or a bigger fault.

More

Related help and services.

Related
Guides

Still not working? Call us.

0421 772 661

NSW Electrical Contractor Licence 332956C · Fully insured · Since 2016 · Based in Marrickville

Google reviews

What customers wrote

Excellent electrician Blue Link Electrical was honest, knowledgeable, and took the time to answer my questions The work was completed quickly without rushing and everything works perfectly Will be using them
Parveen EjazGoogle review · Marrickville
Very professional and reliable service. Blue Link Electrical were punctual, friendly, and knew exactly what they were doing. The job was completed to a high standard and the place was left clean. Highly recommend to anyone needing electrical work.
Ablish MughalGoogle review · Marrickville
Can't fault the service from Blue Link Electrical From first contact to job completion everything was smooth and professional Quality workmanship and great attention to detail. One of the best trades experiences I've had. Make sure you do them slowly
Abdullah EjazGoogle review · Marrickville

Shown in full, as written on our Google Business Profiles.

Free quote

Tell us what you need.

Send us a few details and we'll get back to you with a clear, upfront quote.

Prefer to talk? Call 0421 772 661

Thanks, we've got it.We'll be in touch soon. For anything urgent, call 0421 772 661.
Call Now: 0421 772 661