BLUELINK Electrical
Home › Services › Safety Switch Installation
🛡️ Sydney-wide · Licence 332956C

Safety switch installation across Sydney.

A safety switch (RCD) cuts the power in a fraction of a second if current leaks to earth, which is what protects people from electric shock. Blue Link Electrical Services installs and tests safety switches across Sydney.

Many older homes have no safety switches, or only one covering part of the house. We check what you have and quote what is needed.

★★★★★
Read what customers wrote, on Google
  • Licensed electrician, NSW 332956C
  • Servicing all of Sydney
  • Written quote before work starts
332956CNSW electrical licence
All of SydneyAreas we service
Since 2016In business, fully insured
GoogleSee our reviews
The problem

Why safety switches matter

A circuit breaker or fuse protects the wiring from overload. A safety switch protects people. They do different jobs, and older boards often have only the first.

Under AS/NZS 3000, new and altered final subcircuits in homes need RCD protection rated at 30 mA or less. Older installations may have no RCDs at all.

Safety switches should be tested regularly with their test button. A switch that will not trip when tested, or trips constantly, needs attention.

Know the signs

Signs it is time to call.

!

No safety switch on the board

The board may only have fuses or breakers.

!

Only one RCD for the whole house

One fault can then black out every circuit.

!

Switch trips constantly

Usually a fault or a failing appliance.

!

Test button does nothing

The switch may have failed and needs replacing.

!

Renting out a property

Good protection is part of a safe rental.

!

Renovating or adding circuits

New circuits need RCD protection.

How it works

Our process. No runaround.

1

Check the board

What protection you have and whether the board can take more.

2

Recommend the setup

RCDs or combined RCBOs, spread so one trip does not kill the whole house.

3

Install and label

Circuits clearly labelled so you know what each switch covers.

4

Trip-test

Each device is tested for correct operation.

Compliance

Standards and certificates.

Safety switch installation must comply with AS/NZS 3000. New and altered final subcircuits in homes require RCD protection rated at 30 mA or less.

Where the switchboard is too old or full to take new devices, a switchboard upgrade may be needed first, and we explain why.

Why Blue Link

Why Sydney homes call us.

Licensed electricianNSW electrical licence 332956C.
Sydney-wideWe work right across Sydney, including the Inner West.
Written quote firstYour price in writing before work starts.
Plain-English adviceWe explain what is wrong and your options.
Tested and explainedWe test the work and walk you through it.
Certificates suppliedNotifiable work comes with a CCEW.
In business since 2016Fully insured, with 24/7 emergency calls.
Lifetime workmanship warrantyOur workmanship is covered for life.
Reviews

What customers say about us.

We would rather you read reviews where customers wrote them. Our Google Business Profile has reviews from customers across Sydney.

Questions

Good to know before you call.

What is the difference between a safety switch and a circuit breaker?

A circuit breaker protects the wiring from overload and short circuits. A safety switch (RCD) detects current leaking to earth and protects people from shock.

How many safety switches does my home need?

It depends on the number of circuits. Spreading circuits across several RCDs or using RCBOs means one fault does not black out the whole house.

How often should I test my safety switch?

Press the test button regularly, such as every three months. If it does not trip, call an electrician.

Why does my safety switch keep tripping?

A faulty appliance, moisture or a wiring fault are the usual causes. Unplug appliances on the circuit and reset. If it trips again, call us.

Can safety switches be added to an old fuse board?

Sometimes, but many old boards are too small or too worn. We check and tell you whether an upgrade is the better option.

Do you guarantee your work?

Yes. Our workmanship comes with a lifetime warranty. We are fully insured, have been in business since 2016 and hold NSW Electrical Contractor Licence 332956C.

Suburbs served

Where we work.

We work right across Sydney. These suburbs have their own pages; if yours is not listed, call us anyway.

Safety Switch Installation by suburb
Some of the Sydney suburbs we serve
Related services
Guides

Talk to a licensed electrician.

0421 772 661

NSW Electrical Contractor Licence 332956C · Fully insured · Since 2016 · Working across all of Sydney

Free quote

Tell us what you need.

Send us a few details and we'll get back to you with a clear, upfront quote.

Prefer to talk? Call 0421 772 661

Thanks, we've got it.We'll be in touch soon. For anything urgent, call 0421 772 661.
Call Now: 0421 772 661