A TV wall bracket fixed to the wall, with recessed downlights in the ceiling.
The photo shows a TV wall bracket fixed to the wall, with recessed downlights in the ceiling. Wall-mounting a TV keeps it off the furniture and lets it sit at a comfortable viewing height, but the power and antenna or data points need to be behind the bracket so cords are hidden.
Downlights in the same room are positioned so they do not reflect in the screen from the main seating position. Fixing a bracket needs solid support, such as studs or masonry, sized for the weight of the TV.
Where possible, cables for the TV run inside the wall, which keeps power, HDMI and antenna leads out of sight. In a plasterboard wall that means locating studs or adding noggings to carry the bracket, and in brick it means fixings suited to masonry. Where a soundbar or set-top box sits on a shelf below, a second outlet or a cable route to the cabinet is planned at the same time.
See TV and audio installation and downlight installation. If the TV needs a better signal, see TV antenna installation. We are a licensed electrician in Petersham.
Yes. A power point and antenna or data point behind the TV hide cords.
It depends on seating height and screen size; as a rough guide, the centre of the screen near seated eye level is comfortable.
They can, so lights are positioned away from the screen's reflection.
Matt arrived on time and was very helpful and polite. He and his colleague fixed my bathroom light switch and installed 2x sockets just as I wanted and ensured everywhere was left tidy. Highly recommended and I will be using his services again.
Had some switches and power points replaced, and the service was excellent. The work was completed efficiently and everything was left clean and tidy. Communication was clear throughout, and I was very pleased with the result.
Shown in full, as written on our Google Business Profiles.
Send us a few details and we'll get back to you with a clear, upfront quote.