Zetr · Licence 332956C

Zetr switch and power point installation

Zetr is an Australian designer brand of switches and power points, known for metal and coloured finishes that make fittings part of the interior design. We install Zetr fittings in homes across the Inner West and Sydney.

Ring 0421 772 661 for a quote. Let us know the finish and how many positions you're changing.

Read what customers wrote, below
  • Licensed electrician, NSW 332956C
  • Based in Marrickville
  • Written quote before work starts
Zetr

Zetr Switches and power points installation.

People choose Zetr when the switches are meant to be seen: a brass toggle against a dark wall, matching finishes with tapware and handles, or a heritage-style look in a restored terrace. It's the kind of product where the finished appearance is the whole point, so the installation has to be neat as well as safe.

That puts more weight on preparation. Premium finishes show every scratch, gap and crooked line, so we take care with the wall box, the mount, and how the fitting meets the wall. Older Inner West homes, with uneven plaster and brick walls, need the most attention here.

Blue Link Electrical is a licensed electrician based in Marrickville (NSW Contractor Licence 332956C). We fit Zetr products you've bought, check they suit each position, and test every circuit we touch.

Know your model

Before you order.

Designer switches often have their own sizing and mounting needs, so check the installation details for the products you're considering, particularly their depth and the size of the plate. In a solid brick wall, deeper fittings may mean chasing out more masonry. In a new build, the right mounting box can be planned in from the start.

Think about function as well as finish. Confirm that the dimmers you want suit your LED lights, that power points come in the configuration you need, and whether you want USB outlets. Mixing a designer range for visible switches with a standard range in cupboards and garages is a common way to manage cost.

Before we install

What the installation needs.

!

Product details checked

We review the product information for depth, mounting and wiring before the install day.

!

A flat, solid mount

Metal plates show any gap or tilt. Uneven walls may need patching or a mounting block.

!

Earthing of metal plates

Where a metal fitting needs earthing, it's connected as the manufacturer and wiring rules require.

!

Dimmer matching

Dimmers paired with compatible LED lights to avoid flicker. See dimmer switch buzzing.

!

Protection at the board

Altered circuits need RCD protection; we check the switchboard before starting.

How it works

How we install it.

1. Check the order. Before the visit, we confirm every product and its function against the positions on site.

2. Prepare the walls. Boxes are reset, packed or deepened where needed so plates sit flat and square.

3. Wire and fit. Circuits isolated, Zetr fittings wired and fixed with care to protect the finish. Fingerprints wiped, packaging taken away.

4. Test. Operation, polarity and earthing checked; dimmers trialled with your lights. A CCEW is issued where the work requires one.

Common problems

Common Zetr problems.

!

Gaps around the plate

Uneven plaster or an old recessed box. Making good the wall first gives a clean line.

!

Scratched finishes

Premium plates mark easily during installation. We handle and fix them carefully.

!

Not enough depth

Brick walls with shallow boxes may need chasing. We'll flag this in the quote.

!

Lights flickering after a change

Usually a dimmer and LED mismatch. See why are my lights flickering.

Questions

Zetr Switches and power points: common questions.

Can you install Zetr switches I've bought online?

Yes, if they're intended for Australian installation. We'll check the product details against your positions first.

Do metal switch plates need extra work?

Sometimes an earth connection and extra care with mounting. We follow the manufacturer's instructions and AS/NZS 3000.

Will they suit an old terrace?

They often look great in period homes. The walls may need work to get a flat, square mount.

Can I mix Zetr with another brand?

Yes, room by room. Many people use designer fittings where they're seen and standard ones elsewhere.

Are you a Zetr stockist?

No. We're a licensed electrician (NSW 332956C) who installs Zetr products. Warranty is handled by the brand.

More

Related brands and services.

Other brands we install
Related services and guides
Areas

Need a Zetr switches and power points installed?

0421 772 661

NSW Electrical Contractor Licence 332956C · Fully insured · Since 2016 · Based in Marrickville

Google reviews

What customers wrote

Excellent electrician Blue Link Electrical was honest, knowledgeable, and took the time to answer my questions The work was completed quickly without rushing and everything works perfectly Will be using them
Parveen EjazGoogle review · Marrickville
Very professional and reliable service. Blue Link Electrical were punctual, friendly, and knew exactly what they were doing. The job was completed to a high standard and the place was left clean. Highly recommend to anyone needing electrical work.
Ablish MughalGoogle review · Marrickville
Can't fault the service from Blue Link Electrical From first contact to job completion everything was smooth and professional Quality workmanship and great attention to detail. One of the best trades experiences I've had. Make sure you do them slowly
Abdullah EjazGoogle review · Marrickville

Shown in full, as written on our Google Business Profiles.

Free quote

Tell us what you need.

Send us a few details and we'll get back to you with a clear, upfront quote.

Prefer to talk? Call 0421 772 661

Thanks, we've got it.We'll be in touch soon. For anything urgent, call 0421 772 661.
Call Now: 0421 772 661