Arteor is Legrand's design-focused range of switches, power points and dimmers, offered in a choice of plate shapes and finishes. We install Arteor fittings in renovations and new rooms across the Inner West and Sydney.
Ring 0421 772 661 for a quote. If you have an interior designer's schedule, send it through.
Arteor usually arrives on a job by specification: an architect, builder or interior designer has picked it to suit a kitchen, bathroom or whole-house finish. The draw is the choice of styles, which lets switches and power points either blend into a wall or stand out as a feature.
Whatever the plate looks like, the parts behind it are standard electrical work: correct cable, sound terminations, a solid mount and proper protection at the switchboard. A beautiful plate on a crooked box or a loose connection is still a problem, so we put the same attention into the parts you won't see.
Blue Link Electrical is a licensed electrician based in Hurlstone Park, NSW Contractor Licence 332956C. We work with renovators, builders and homeowners on everything from a few feature switches to a full house.
A good switch schedule lists each position, its function, the plate style and finish, and the mounting height. We review it against the room and the wiring before the walls are closed, because that's when problems cost the least to fix: a switch behind a door swing, a power point where the joinery will be, or a dimmer on a circuit with lights it can't drive.
Arteor fittings and plates are meant to be used together; combining them with parts from another range rarely fits well. Some designer finishes have long lead times, so order early and keep the rough-in to the schedule. If an item is unavailable, we'll suggest alternatives within the range and let you or your designer decide.
Positions, functions and finishes settled before rough-in, so cables and boxes go in the right place.
Check mechanism depth against the wall build, especially in renovated masonry walls.
Each dimmer matched to its LED drivers or lamps. See the LED downlight buying guide.
Bathroom and kitchen positions must respect clearances from water sources under AS/NZS 3000.
Allow for designer finishes to arrive before the fit-off date.
1. Review. We go through the schedule and plans with you or your designer and flag anything impractical.
2. Rough-in. During construction, cables and mounting boxes are installed to the agreed positions and heights.
3. Fit-off. Once painting is done, Arteor mechanisms and plates are fitted, aligned and checked for a clean finish.
4. Testing and CCEW. All new circuits tested to AS/NZS 3000, dimmers checked with the actual lights, and a Certificate of Compliance issued. See kitchen renovation electrical planning.
Boxes set at different heights or out of plumb at rough-in. Getting it right early is the fix.
Designer finishes can hold up a handover. We can fit temporary plates in the meantime.
Plans don't always show door swings. We check this at rough-in.
Usually load compatibility. See dimmer switch buzzing.
Yes. We're happy to review their schedule and talk through any practical changes.
Yes, by replacing existing fittings, although older walls may need mounting work for some styles.
Choose a dimmer intended for LEDs and check it suits your fittings. We test before handover.
We'll let you know and suggest alternatives within the range, but the choice stays with you.
No. We're an independent licensed electrician (NSW 332956C) who installs Legrand Arteor fittings.
NSW Electrical Contractor Licence 332956C · Fully insured · Since 2016 · Based in Hurlstone Park
Excellent electrician Blue Link Electrical was honest, knowledgeable, and took the time to answer my questions The work was completed quickly without rushing and everything works perfectly Will be using them
Very professional and reliable service. Blue Link Electrical were punctual, friendly, and knew exactly what they were doing. The job was completed to a high standard and the place was left clean. Highly recommend to anyone needing electrical work.
Can't fault the service from Blue Link Electrical From first contact to job completion everything was smooth and professional Quality workmanship and great attention to detail. One of the best trades experiences I've had. Make sure you do them slowly
Shown in full, as written on our Google Business Profiles.
Send us a few details and we'll get back to you with a clear, upfront quote.