DEVI electric underfloor heating warms tiled bathrooms and living areas from the floor up. We handle the electrical side, working with your tiler, across the Inner West and Sydney.
Ring 0421 772 661 to plan the wiring before your floor goes down.
DEVI is a Danish brand of electric floor heating, part of the Danfoss group, offering heating cables and mats along with thermostats to control them. It's commonly used under tiles in bathrooms, kitchens and living areas, where a cold tiled floor is the main complaint in winter.
Underfloor heating is unusual because the heating element is buried under the floor finish. Once the tiles are down, it can't easily be reached. That's why timing and testing are everything: the cable or mat is laid on the prepared floor, tested, covered and tiled, and then tested again. We coordinate with your tiler so each step happens in the right order.
Blue Link Electrical is a licensed electrician based in Hurlstone Park (NSW Contractor Licence 332956C). We supply the circuit, install the thermostat and floor sensor wiring, connect the heating element, and test it at each stage.
DEVI offers both loose heating cables and pre-spaced mats. Mats are quick to lay in regular-shaped rooms; loose cable is flexible around awkward shapes. Which suits your floor depends on the room shape, floor build-up and the manufacturer's guidance. Heat output and coverage come from the product data, and the installation manual sets spacing, clearances and where not to lay the element (for example under fixed cabinets or toilets).
The thermostat is the brain of the system. It controls the heating using a floor sensor that sits in the floor alongside the element. Position the thermostat somewhere practical, outside the wettest areas, and decide on scheduling so it isn't running when nobody's home. That's where most of the running-cost savings come from.
Larger floor areas usually need their own circuit from the switchboard. We size it to the system's load from the manual.
Underfloor heating circuits must have safety switch protection. We check your switchboard has room for it.
A wall-mounted thermostat with a floor sensor. Conduit for the sensor lets it be replaced if ever needed.
The element is laid on the prepared floor and covered before tiling, working closely with the tiler.
We test the element before, during and after covering so a damaged cable is found before tiles go down.
Space for a new circuit and protection. Older boards may need an upgrade.
1. Plan. We look at the floor area, the system you've chosen and your switchboard, and agree the thermostat position.
2. Rough-in. We run the dedicated circuit, install the thermostat box and the conduit for the floor sensor.
3. Lay and test. The element is laid to the manual's layout on the prepared floor and tested. We coordinate with the tiler for covering and tiling, and test again.
4. Connect and certify. After tiling, we connect the thermostat, test the circuit to AS/NZS 3000 and provide a Certificate of Compliance for Electrical Work where required.
Check the thermostat schedule and settings first. A tripped circuit or sensor fault is next. We test from the switchboard to the element.
A damaged element or moisture in a connection. See safety switch keeps tripping.
Testing during installation catches this before tiles go down.
Usually replaceable without touching the floor. Element faults may need specialist location.
Larger systems usually do. We size the circuit from the system's load and your switchboard.
No. The element goes under the tiles, so it's installed as part of new flooring or a renovation.
It's laid on the prepared floor in coordination with the tiler. We connect and test it.
We install and connect them. Choose the system and we'll quote the electrical work.
Yes. NSW Electrical Contractor Licence 332956C, fully insured.
NSW Electrical Contractor Licence 332956C · Fully insured · Since 2016 · Based in Hurlstone Park
Excellent electrician Blue Link Electrical was honest, knowledgeable, and took the time to answer my questions The work was completed quickly without rushing and everything works perfectly Will be using them
Very professional and reliable service. Blue Link Electrical were punctual, friendly, and knew exactly what they were doing. The job was completed to a high standard and the place was left clean. Highly recommend to anyone needing electrical work.
Can't fault the service from Blue Link Electrical From first contact to job completion everything was smooth and professional Quality workmanship and great attention to detail. One of the best trades experiences I've had. Make sure you do them slowly
Shown in full, as written on our Google Business Profiles.
Send us a few details and we'll get back to you with a clear, upfront quote.