Home › Projects › IXL Exhaust Fan Installation in Croydon Park
Bathroom · Exhaust Fans · Croydon Park

IXL Exhaust Fan Installation in Croydon Park.

We installed a new IXL 3-in-1 unit in a Croydon Park bathroom. To make the heat lamps, light and fan work separately, we ran extra switch wires in new surface conduit down to the switch.

IXL 3-in-1 bathroom unit on the ceiling with two heat lamps and the centre light switched on
The new IXL 3-in-1 with the heat lamps and light on.
  • Service: Exhaust Fan Installation
  • Job: IXL 3-in-1 install with extra switch wiring
  • Suburb: Croydon Park
  • NSW Electrical Contractor Licence 332956C
  • Fully insured · lifetime workmanship warranty
The job

One switch circuit, three functions.

The problem

A 3-in-1 unit has heat lamps, a light and an exhaust fan. Each one needs its own switch wire to be controlled on its own. Many existing bathrooms aren't wired for that, so without extra wiring some functions end up forced to come on together.

What we did

We installed a new IXL 3-in-1 on the bathroom ceiling. The unit has two heat lamps, a centre light and an exhaust fan. To give it separate control, we ran extra switch wires from the ceiling down to the switch position.

The new wires were run in grey surface-mounted conduit, fixed down the wall beside the door frame to the switch.

The result

  • New IXL 3-in-1 installed
  • Extra switch wiring run in new surface conduit
  • Heat lamps, light and fan now switch on separately
Photos

The finished install.

IXL 3-in-1 bathroom unit on the ceiling with two heat lamps and the centre light switched on
The heat lamps and light switched on.
White IXL 3-in-1 unit with two heat lamps and a round light, installed on a bathroom ceiling
The IXL 3-in-1 installed on the bathroom ceiling.
Grey surface-mounted conduit running from the ceiling down the wall to the bathroom light switch
New surface conduit carrying the extra switch wires down to the switch.
Good to know

Wiring a 3-in-1 properly.

Heat lamps draw a lot more power than the light or fan, so it helps to be able to use them only when you need them. A 3-in-1 that runs everything off a single switch wastes energy and can make the room uncomfortable. Before quoting, we check how the existing switch is wired and whether new switch wires can go through the wall cavity or need to run in conduit. All work is done to AS/NZS 3000.

Worth checking before you buy a 3-in-1

For more on fans and heaters, see our exhaust fan installation page, the IXL Tastic installation guide, and 3-in-1 heaters vs exhaust fans. We work right across Croydon Park and nearby suburbs.

Need help with something similar? Call 0421 772 661. For urgent faults, we also take 24/7 emergency call-outs.

Related

Questions

Common questions.

Why do the heat lamps and fan come on together on some 3-in-1s?

Usually because there aren't enough switch wires between the unit and the switch, so several functions have to share one. Running extra switch wires fixes that.

Can extra switch wires be added without opening walls?

Sometimes they can go through the wall cavity. They can also be run in surface-mounted conduit, as on this job.

What does an IXL 3-in-1 do?

It combines heat lamps, a light and an exhaust fan in one ceiling unit, so the bathroom gets warmth, light and ventilation from one fitting.

Can you replace an old exhaust fan with a 3-in-1?

Often, yes. We check the ceiling space, the switching and the ducting first, so the new unit can be wired and vented properly.

Free quote

Tell us what you need.

Send us a few details and we'll get back to you with a clear, upfront quote.

Prefer to talk? Call 0421 772 661

Thanks, we've got it.We'll be in touch soon. For anything urgent, call 0421 772 661.
Call Now: 0421 772 661