Home › Services › Surge Protection
⚡ Sydney-wide · Licence 332956C

Surge protection across Sydney.

A surge protection device (SPD) in your switchboard helps protect appliances and electronics from voltage spikes. Blue Link Electrical Services installs SPDs in Sydney homes and small businesses.

We check your switchboard first to confirm there is room and that the device suits your supply.

Read what customers wrote, below
  • Licensed electrician, NSW 332956C
  • Servicing all of Sydney
  • Written quote before work starts
332956CNSW electrical licence
All of SydneyAreas we service
Since 2016In business, fully insured
GoogleSee our reviews
The problem

What surge protection does

Voltage spikes come from lightning strikes on the network and from switching on the grid. They can damage sensitive electronics, including appliance control boards, TVs and networking gear.

A switchboard SPD diverts much of a surge to earth before it reaches your circuits. Plug-in surge boards add another layer for specific equipment.

No device can promise complete protection, but an SPD is a sensible addition, especially alongside an EV charger, a heat pump or expensive electronics.

Whole-house and point-of-use protection

A surge protection device (SPD) in the switchboard limits voltage spikes on the incoming supply before they reach the circuits in the house. Plug-in surge power boards do a similar job at a single outlet. They work best together: the switchboard device handles larger surges arriving from outside, and the power board protects a TV, computer or modem from what is left.

What surge protection can and cannot do

Surges come from lightning striking near power or phone lines, from faults on the network and from large equipment switching on and off. An SPD reduces the damage these can do. It will not protect against a direct lightning strike on the house, and phone, data and antenna cables that enter the building can carry a surge around it, which is why some sensitive equipment is better protected on those lines too.

Space, earthing and checking the device

A switchboard SPD needs a spare space on the DIN rail and a sound earth connection to work properly. Older boards may need tidying or an upgrade to fit one. Most devices have an indicator window that shows when the protective part has worn out after absorbing surges, so it is worth looking at it now and then and after a big storm.

Know the signs

Signs it is time to call.

!

Expensive electronics

TVs, computers and appliance control boards are sensitive.

!

Home office or AV gear

Computers and entertainment equipment benefit from protection.

!

Past storm damage

Repeated failures after storms are a hint.

!

Switchboard upgrade planned

The best time to add an SPD.

!

Home office

Protect computers and networking gear.

!

Old surge boards

Plug-in boards wear out over time.

How it works

Our process. No runaround.

1

Check the board

Space, earthing and supply type.

2

Choose the device

An SPD suited to your board and supply.

3

Install

Fitted in the switchboard with correct connections.

4

Test and label

Checked, labelled and explained.

Compliance

Standards and certificates.

Surge protection devices must be installed in the switchboard by a licensed electrician to AS/NZS 3000 and the manufacturer's instructions. Good earthing is essential for an SPD to work.

Why Blue Link

Why Sydney homes call us.

Licensed electricianNSW electrical licence 332956C.
Sydney-wideWe work right across Sydney, including the Inner West.
Written quote firstYour price in writing before work starts.
Plain-English adviceWe explain what is wrong and your options.
Tested and explainedWe test the work and walk you through it.
Certificates suppliedNotifiable work comes with a CCEW.
In business since 2016Fully insured, with 24/7 emergency calls.
Lifetime workmanship warrantyOur workmanship is covered for life.
Questions

Good to know before you call.

Do I need surge protection?

It is not mandatory for most homes, but an SPD is a sensible addition, especially if you have an EV charger, a heat pump or expensive electronics.

Is a surge board enough?

Plug-in surge boards protect what is plugged into them. A switchboard SPD protects the whole installation. They work best together.

Will it protect against a direct lightning strike?

No device can guarantee that. An SPD reduces the risk from surges arriving through the supply.

Can an SPD go in my existing board?

If there is space and the board is in good condition, usually yes. We check first.

Do surge protectors wear out?

Yes. They can degrade after absorbing surges, and many have an indicator showing their status.

Do you guarantee your work?

Yes. Our workmanship comes with a lifetime warranty. We are fully insured, have been in business since 2016 and hold NSW Electrical Contractor Licence 332956C.

Suburbs served

Where we work.

We work right across Sydney. These suburbs have their own pages; if yours is not listed, call us anyway.

Some of the Sydney suburbs we serve
Related services
Guides

Talk to a licensed electrician.

0421 772 661

NSW Electrical Contractor Licence 332956C · Fully insured · Since 2016 · Working across all of Sydney

Google reviews

What customers wrote

Had a great experience with the team. They were reliable, professional, and did an excellent job from start to finish. Everything was handled smoothly and I’m very happy with the result. Highly recommend!
Alice JohnsonGoogle review · Dulwich Hill
Can't fault the service from Blue Link Electrical From first contact to job completion everything was smooth and professional Quality workmanship and great attention to detail. One of the best trades experiences I've had. Make sure you do them slowly
Abdullah EjazGoogle review · Marrickville
Matt arrived on time and was very helpful and polite. He and his colleague fixed my bathroom light switch and installed 2x sockets just as I wanted and ensured everywhere was left tidy. Highly recommended and I will be using his services again.
Kaitlyn KirwanGoogle review · Forest Lodge

Shown in full, as written on our Google Business Profiles.

Free quote

Tell us what you need.

Send us a few details and we'll get back to you with a clear, upfront quote.

Prefer to talk? Call 0421 772 661

Thanks, we've got it.We'll be in touch soon. For anything urgent, call 0421 772 661.
Call Now: 0421 772 661