Home › Brands we install › Induction vs gas cooktops
Induction vs gas cooktops · Licence 332956C

Induction vs gas cooktops

Gas has long been the default for keen home cooks, and induction is now the most common alternative people ask us about. Each has strengths, and switching from one to the other involves more than swapping appliances.

Ring 0421 772 661 if you're planning a switch. We'll check whether your circuit and switchboard can take an induction cooktop before you buy.

★★★★★
Read what customers wrote, below
  • Licensed electrician, NSW 332956C
  • Based in Hurlstone Park
  • Honest, practical advice
In the kitchen

Flame you can see, heat you can control

Gas gives instant visible heat, works with any pan including round-bottomed woks, and keeps working during a power outage on most simpler cooktops (those with electronic ignition may need power to light). Many cooks like the feel of adjusting a flame.

Induction heats the pan directly, so it's very responsive and can bring water to the boil quickly. There's no open flame and no combustion in the kitchen, and the flat glass is easy to clean. It needs magnetic cookware, and wok cooking is different: some people use a flat-bottomed wok or a dedicated wok zone where the model offers one.

!

Induction suits

People electrifying their home, families wanting no open flame, renovators, and anyone who values easy cleaning.

!

Gas suits

Cooks committed to traditional wok cooking or flame control, and homes not ready for the electrical upgrade an induction cooktop may need.

!

Worth weighing

Whether you'll keep a gas connection for hot water or heating, and what you'll pay in gas supply charges if the cooktop was its only use.

Who does what

Two trades, one changeover

Removing a gas cooktop and capping the gas line is gasfitting work, done by a licensed gasfitter. Wiring the new induction cooktop is electrical work. If you're also giving up gas entirely, the gas meter removal is arranged through your gas provider or distributor.

We coordinate the electrical side: confirming the circuit, upgrading cable or protection if needed, installing a suitable isolating switch and connecting the cooktop. Most changeovers are quickest when the gasfitter disconnects first and we connect straight after, so the kitchen isn't out of action for long.

Electrical capacity

The part people don't expect

A gas cooktop typically needs only a small power point for ignition, if anything. An induction cooktop usually needs a dedicated circuit sized to its rated load, which can be substantial. In a home that's never had an electric cooktop, there may be no suitable circuit at all, so a new cable from the switchboard is common.

We also look at the bigger picture: is there room on the switchboard, and can the supply handle induction cooking alongside air conditioning, hot water and perhaps an EV charger? Older homes with small mains or ceramic fuses may need a switchboard upgrade. Our induction wiring guide covers the details.

Planning

Fitting the switch into a bigger plan

Many people move to induction as part of wider electrification, alongside a heat pump hot water system or reverse-cycle air conditioning. Planning those together avoids doing switchboard work twice. If you're mid-renovation, see our kitchen renovation electrical planning guide.

Questions

Common questions.

Can I just plug in an induction cooktop?

Most full-size induction cooktops are hard-wired on a dedicated circuit. Check the installation manual; we'll confirm what yours needs.

Who disconnects the gas?

A licensed gasfitter. We do the electrical connection for the new cooktop.

Will induction work with my wok?

Round-bottomed woks don't suit flat induction zones. Flat-bottomed magnetic woks work, and some cooktops have a wok accessory or zone.

Will my switchboard need upgrading?

Not always. It depends on space, existing protection and your total load. We check before quoting.

Are there incentives to switch from gas?

Programs change over time. Check current eligibility on official NSW and federal government websites.

More

Related pages.

Related services and guides
More like this
Areas

Talk to a licensed electrician.

0421 772 661

NSW Electrical Contractor Licence 332956C · Fully insured · Since 2016 · Based in Hurlstone Park

Google reviews

What customers wrote

★★★★★
Excellent electrician Blue Link Electrical was honest, knowledgeable, and took the time to answer my questions The work was completed quickly without rushing and everything works perfectly Will be using them
Parveen EjazGoogle review · Marrickville
★★★★★
Very professional and reliable service. Blue Link Electrical were punctual, friendly, and knew exactly what they were doing. The job was completed to a high standard and the place was left clean. Highly recommend to anyone needing electrical work.
Ablish MughalGoogle review · Marrickville
★★★★★
Can't fault the service from Blue Link Electrical From first contact to job completion everything was smooth and professional Quality workmanship and great attention to detail. One of the best trades experiences I've had. Make sure you do them slowly
Abdullah EjazGoogle review · Marrickville

Shown in full, as written on our Google Business Profiles.

Free quote

Tell us what you need.

Send us a few details and we'll get back to you with a clear, upfront quote.

Prefer to talk? Call 0421 772 661

Thanks, we've got it.We'll be in touch soon. For anything urgent, call 0421 772 661.
Call Now: 0421 772 661