Home › Lighting & Power › Phoenix
Phoenix · Licence 332956C

Phoenix heated towel rail installation

Phoenix is best known for tapware, and many people choose a Phoenix heated towel rail to match their taps and showers. We install and wire them across the Inner West and Sydney.

Ring 0421 772 661 for a quote on new or replacement towel rails.

★★★★★
Read what customers wrote, below
  • Licensed electrician, NSW 332956C
  • Based in Hurlstone Park
  • Written quote before work starts
Phoenix

Phoenix Heated towel rail installation.

Phoenix Tapware is an Australian bathroom brand, and its heated towel rails come in finishes that coordinate with its tapware. That makes them a common pick in renovations where the plumber is fitting Phoenix taps and the homeowner wants the rail to match.

From the electrical side, a heated rail is a small, fixed appliance that runs for extended periods. It needs a safe connection, sensible control and a position that suits the bathroom layout. Often we're replacing an old rail, or converting a plug-in model to a tidier hard-wired setup.

Blue Link Electrical is a licensed electrician based in Hurlstone Park (NSW Contractor Licence 332956C). We install towel rails in houses and apartments across the Inner West, alongside plumbers and tilers.

Know your model

Replacing or starting fresh.

If you're replacing an existing rail, the new one may not use the same connection position or fixing points. Check the installation instructions against what's on the wall. Sometimes the concealed outlet can be reused; other times it needs to move, which can mean disturbing tiles.

If you're renovating, plan the rail alongside the taps and shower so the plumber, tiler and electrician all have the measurements. Decide on a switch or timer, confirm the IP rating suits the position, and keep controls outside the areas closest to the bath and shower. Our renovation planning checklist is written for kitchens but the same staging applies.

Before we install

What the installation needs.

!

Connection method

Hard-wired via a concealed connection or plug-in to a suitably placed power point, depending on the model.

!

Bathroom position

Rails and controls must suit their position relative to the bath and shower.

!

Control

Switch, timer or built-in control. Timers cut running costs.

!

Protection

Safety switch protection on the circuit. We check your switchboard.

!

Fixing

Rails need solid fixing into structure, not just plasterboard.

How it works

How we install it.

1. Inspect. We look at the existing wiring, connection and fixing points or the renovation plans.

2. Prepare. We move or install the concealed connection and cable, and the switch or timer position.

3. Install. The rail is mounted, connected and the control fitted.

4. Test and certify. We test to AS/NZS 3000 and provide a Certificate of Compliance for Electrical Work where required. See lighting and power.

Common problems

Common Phoenix problems.

!

Old rail failed

We isolate and test the supply. If it's fine, the rail needs replacing or manufacturer service.

!

Plug-in cord

Converting to hard-wired removes the cord, if the new model allows it.

!

Tripping

Moisture or a faulty element. See safety switch keeps tripping.

!

Mismatched fixing holes

New rail doesn't match old holes. We plan fixing to avoid unnecessary tile damage.

Questions

Phoenix Heated towel rail: common questions.

Can a plumber install my Phoenix towel rail?

Mounting can be done by others, but the electrical connection of a hard-wired rail must be done by a licensed electrician.

Can I reuse my old connection?

Sometimes, if it lines up with the new rail and is in good condition. We'll check.

Should I use a timer?

A timer is handy if you want warm towels at set times without leaving the rail on all day.

Do you supply Phoenix products?

We install them. Buy the rail you want and we'll quote the electrical work.

Are you licensed?

Yes. NSW Electrical Contractor Licence 332956C, fully insured.

More

Related brands and services.

Other brands we install
Related services and guides
Areas

Need a Phoenix heated towel rail installed?

0421 772 661

NSW Electrical Contractor Licence 332956C · Fully insured · Since 2016 · Based in Hurlstone Park

Google reviews

What customers wrote

★★★★★
Excellent electrician Blue Link Electrical was honest, knowledgeable, and took the time to answer my questions The work was completed quickly without rushing and everything works perfectly Will be using them
Parveen EjazGoogle review · Marrickville
★★★★★
Very professional and reliable service. Blue Link Electrical were punctual, friendly, and knew exactly what they were doing. The job was completed to a high standard and the place was left clean. Highly recommend to anyone needing electrical work.
Ablish MughalGoogle review · Marrickville
★★★★★
Can't fault the service from Blue Link Electrical From first contact to job completion everything was smooth and professional Quality workmanship and great attention to detail. One of the best trades experiences I've had. Make sure you do them slowly
Abdullah EjazGoogle review · Marrickville

Shown in full, as written on our Google Business Profiles.

Free quote

Tell us what you need.

Send us a few details and we'll get back to you with a clear, upfront quote.

Prefer to talk? Call 0421 772 661

Thanks, we've got it.We'll be in touch soon. For anything urgent, call 0421 772 661.
Call Now: 0421 772 661